PENINGKATAN PRODUKTIVITAS AMPLANG MENGGUNAKAN LEAN SIX SIGMA DI UD KELOMPOK MELATI

Nina Hairiyah, Raden Rizki Amalia, Nuryati Nuryati

Abstract

Based on the result of preliminary research at UD Kelompok Melati, in the production process the problem was found, namely the occurrence of waste in the production process. This research purpose to describe the Amplang production process flow, analyze efforts to improve Amplang product productivity with the Lean Six Sigma method and recommend improvements to improve the productivity of Amplang product in UD Kelompok Melati. The production process of Amplang at UD Kelompok Melati begins with sorting of mackerel, cleaning of mackerel, separating meat and bone, milling of mackerel meat, mixing the meatwith mashed seasonings, forming dough, frying, draining and packaging. Efforts to increase productivity at UD Kelompok Melati with the Lean Six Sigma method succeeded in increasing productivity efficiency with a total production time of 113,9 minutes (87,6%) to 94,5 minutes (89,9%) in one production. Recommendations for improving the productivity of Amplang product at UD Kelompok Melati is are proposed layout redesign to reduce waste, create Future Value Stream Mapping (FVSM) and design SOP (Standard Operating Procedure).

Keywords

Amplangs; Lean Six Sigma; Value stream mapping, productivity.

References

Al Faritsy, A. Z. & Suseno, 2015. Peningkatan Produktivitas Perusahaan dengan Menggunakan Metode Six Sigma, Lean, dan Kaizen. Jurnal Teknik Industri. 10(2):103-116.

Alfisyarica, 2015. Variasi Bagian Telur Dan Presentase Dengan Daging Ikan Pada Proses Pengolahan Amplang Ikan Lele (Clarias gariepinus).

Alpasa, F. & Fitria, L., 2014. Penerapan Konsep Lean Service Dan DMAIC Untuk Mengurangi Waktu Tunggu Pelayanan. Jurnal Online Institut Teknologi Nasional, 3(2):108-117.

Kukuh, A., 2015. Analisa Proses Bisnis Dengan Pendekatan Value Stream Mapping (Studi Kasus Pada PT. So Good Food Sidoarjo). Agora, 3(1):271-284.

Pujomoto, D. & Rusanti, D. N., 2015. Usulan Perbaikan Untuk Meningkatkan Produktivitas Fillingplant Dengan Pendekatan Lean Manufacturing Pada PT. Smart Tbk. Semarang. Jurnal Teknik Industri, 10(2):123-132.

Ristyowati, T., Muhsin, A. & Nurani, P. P., 2017. Minimasi Waste Pada Aktivitas Proses Produksi Dengan Konsep Lean Manufacturing. Jurnal Optimasi Sistem Industi, 9(1):85-96.

Rusmawan, 2020. Perancangan Lean Manufacturing Dengan Metode Value Stream Mapping (VSM) Di PT Tjokro Bersaudara (PRIOK). Jurnal Optimasi Teknik Industri, 2(1):30-35.

Setyastuti, Y. D., Dewi, S. M. & Suharyanto, A., 2017. Peningkatan Produktivitas Pada Proses Produksi Pracetak dengan Penerapan Metode Lean Construction Untuk Eliminasi Waste. Jurnal Rekaya Sipil, 11(3):186-193.

Utama, D. M., Dewi, S. K. & Mawarti, V. I., 2016. Identifikasi Waste Pada Proses Produksi Key Set Clarinet Dengan Pendekatan Lean Manufacturing. Jurnal Ilmiah Teknik Industri. pp 36-46.

Yunitasari, E. W. & Nurhayati, E., 2017. Pendekatan Lean Six Sigma dan Taguchi untuk Mengatasi Masalah Pengemasan dan Pemasaran Produk Wedang Uwuh Instan Sruput. Jurnal Science Tech , 3(2):127-136.

DOI

https://doi.org/10.21107/agrointek.v15i4.9973

Metrics

Refbacks

  • There are currently no refbacks.




Copyright (c) 2021 Nina Hairiyah, Raden Rizki Amalia, Nuryati Nuryati

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.