SISTEM MONITORING DAN KONTROL SUHU ALAT SANGRAI BIJI KOPI OTOMATIS BERBASIS MIKROKONTROLER

Ari Rahayuningtyas, Dadang Dayat Hidayat, Maulana Furqon, Teguh Santoso

Abstract

The roasting process influences up to 30 per cent of the aroma and taste of coffee. In this process, the coffee beans will undergo many changes ranging from a reduction in water content, weight and size to changes in colour. To be able to get the optimal aroma and taste of coffee, of course, an automation system in the roaster is needed. This study developed a microcontroller-based automatic coffee roaster monitoring system and temperature control. This study aimed to improve the performance of the roaster by substituting manual work with controlling the temperature by setting the flame on the furnace and monitoring in real-time; web/android can access it. The parameters specified in the design process consisted of time and temperature. The design method used was reengineering, which consisted of Listening to Customers, designing and building prototypes, test driving, and Evaluation. Parameter data from temperature sensor measurements could be recorded and displayed on the LCD or android.The test results showed that the average error percentage of the thermocouple was 1.43 per cent, with an average error of 0.7±0.26; these results indicated that the application of an automation system -based on a microcontroller worked properly. The average value of repeatability temperature every 5 minutes out of ten repeated measurements was  46.7±0.4oC. The performance of the roaster that has been designed was able to reduce the water content maximally by 0.165%/minute. At the same time, the rate of decline in the colour components E*, L*, a*, and b* is 0.754/min, 0.774/min, 0.754/min, 0.774/min, and 0.201/min, respectively.

References

Agustina, R., D. Nurba, W. Antono, and R. Septian. 2019. Pengaruh Suhu dan Lama Penyangraian Terhadap Sifat Fisika-Kimia Kopi Arabika dan Kopi Robusta. Prosiding Seminar Nasional, Inovasi Teknologi Untuk Masyarakat 1(69):5–24.

Arda, A. L. 2019. Rancang Bangun Smart Coffee Roasters Berbasis Mikrokontroller. Jurnal It 10(1):73–82.

Bustos-Vanegas, J. D., P. C. Corrêa, M. A. Martins, F. M. Baptestini, R. C. Campos, G. H. H. de Oliveira, and E. H. M. Nunes. 2018. Developing predictive models for determining physical properties of coffee beans during the roasting process. Industrial Crops and Products 112(December):839–845.

Daywin, F. J., C. O. Doaly, L. Gozali, W. Kosasih, and Guswiyanta. 2020. Improving the quality of coffee shops in jabodetabek area by application and modification of coffee roaster machine capacity 400-600 gram coffee beans using the reverse engineering and engineering design method. IOP Conference Series: Materials Science and Engineering 1007(1).

Direktorat Statistik Tanaman Pangan, Hortikultura, dan P., editor. 2020. Statistik Kopi Indonesia. Badan Pusat Statistik, Jakarta.

Fadai, N. T., J. Melrose, C. P. Please, A. Schulman, and R. A. Van Gorder. 2017. A heat and mass transfer study of coffee bean roasting. International Journal of Heat and Mass Transfer 104:787–799.

Islam, T., and S. C. Mukhopadhyay. 2019. Linearization of the sensors characteristics: A review. International Journal on Smart Sensing and Intelligent Systems 12(1):1–21.

Kurniawan, W. D. W. I. 2018. PENERAPAN MESIN PENYANGRAI KOPI SEMI OTOMATIS Pages 1–6 Seminar Nasional PPM UNESA 2018.

Nazura, Farman, Syafriandi, Dhafie, M. 2022. Desain Mesin Penyangrai Kopi Menggunakan Sumber Elemen Pemanas Listrik (Heater) dan Tenaga Penggerak Motor Listrik. Jurnal Ilmiah Mahasiswa Pertanian 7:526–534.

Nugraha, A., and M. N. Ramadhan. 2018. Pengukuran Teknik Dan Instrumentasi. Universitas Lambung Mangkurat.

Pamungkas, M. T., M. Masrukan, and K. SAR. 2021. PENGARUH SUHU DAN LAMA PENYANGRAIAN (ROASTING) TERHADAP SIFAT FISIK DAN KIMIA PADA SEDUHAN KOPI ARABIKA (Coffea Arabica L.) DARI KABUPATEN GAYO, PROVINSI ACEH. Agrotech : Jurnal Ilmiah Teknologi Pertanian 3(2):1–10.

Prabowo, D., U. S. Jati, and W. Jaya. 2020. Rancang Bangun Coffee Roaster Machine Kapasitas 1 Kg dengan Menggunakan Pengatur Suhu dan Waktu Termostat Rex-C 100. Accurate: Journal of Mechanical Engineering and Science 1(1):1–6.

Radi, B. Purwantana, R. P. Alamsyah, and H. D. Prawira. 2019. Design of Portable Coffee Roaster for Home Industry. IOP Conference Series: Earth and Environmental Science 327(1).

Rasmikayati, E., P. Pardian, H. Hapsari, R. M. Ikhsan, and B. R. Saefudin. 2017. Kajian Sikap Dan Perilaku Konsumen Dalam Pembelian Kopi Serta Pendapatnya Terhadap Varian Produk Dan Potensi Kedainya. MIMBAR AGRIBISNIS: Jurnal Pemikiran Masyarakat Ilmiah Berwawasan Agribisnis 3(2):117.

Sasongko, I. J., and M. Rivai. 2018. Mesin Pemanggang Biji Kopi dengan Suhu Terkendali Menggunakan Arduino Due. Jurnal Teknik ITS 7(2).

Tampubolon, F., Y. Pratama, and I. G. E. Dirgayussa. 2020. Perancangan, Implementasi Monitoring dan Kontrol Alat Pemanggang Kopi. Elkha 12(2):69.

Thoriq, A., W. K. Sugandi, A. Yusuf, and L. H. Imaduddin. 2020. Modifikasi Mesin Roasting Biji Kopi Merek Wiliam Edison Tipe W600I (Studi Kasus Pada Java Sumedang Coffee, Kabupaten Sumedang, Jawa Barat). Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering) 9(4):276.

Wibowo, P. T., A. Sukandi, E. N. Rohmah, P. Studi, T. Konversi, J. T. Mesin, P. N. Jakarta, E. Tube, and S. Collectors. 2018. Rancang Bangun Rokotali ( Roaster Kopi Tanpa Listrik ) Dengan Evacuated Tube Solar Collectors:28–35.

DOI

https://doi.org/10.21107/agrointek.v17i2.14506

Metrics

Refbacks

  • There are currently no refbacks.




Copyright (c) 2023 Maulana Furqon, Ari Rahayuningtyas, Dadang Dayat Hidayat, Teguh Santoso

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.