Karakterisasi mikrostruktur film whey dengan penambahan konjac glucomannan

Fahrullah Fahrullah; Mohamad Ervandi

doi:10.21107/agrointek.v16i3.12303

Karakterisasi mikrostruktur film whey dengan penambahan konjac glucomannan

Fahrullah Fahrullah, Mohamad Ervandi

Abstract

The research aims to observe the effect of konjac glucomannan and different types of plasticizers on the microstructure of whey film. The microstructure of whey film was investigated using an experimental method. The research was conducted in descriptive methods with two treatments.The treatment used konjac glucomannan concentration (P4= 2.5 %; P7= 3 %) and different types of plasticizers (C1= glycerol 30 %; polyethylene glycol 30 %). The results showed that the combination of whey and konjac glucomannan had an effect on the microstructure of the film. The addition of konjac glucomannan concentration, 30 % glycerol, and 30 % PEG plasticizers gave microstructural characteristics with good whey film surface. The microstructure of this film was determined during the heating, drying process and the contribution of the gel from konjac glucomannan to the whey film structure. A more homogeneous edible film microstructure was obtained using a 2.5 % concentration of KGM with the use of 30 % glycerol plasticizer where the distribution of konjac glucomannan was mixed into the whey protein matrix evenly (homogeneous).

Keywords

Film; Konjac; Microstructure; Plasticizer; Whey

Full Text:

PDF (Bahasa Indonesia)

References

Al Awwaly, K.U., Manab, A., Wahyuni, E. 2010. Pembuatan edible film protein whey: Kajian rasio protein dan gliserol terhadap sifat fisik dan kimia. Jurnal Ilmu Dan Teknologi Hasil Ternak. 5(1), 45-46

Adlin, I.A., Sebastiani, Y., Hidayanti, T.N. 2020. Karakterisasi pembuatan edible film dengan variabel kombinasi tepung konjak dan karagenan serta konsentrasi gliserol. Jurnal Ilmiah Teknik Kimia. 4(2),88-95. https://doi.org/10.32493/jitk.v4i2.6654

Cofelice, M., Cuomo, F., Chiralt, A. 2019. Alginate films encapsulating lemongrass essential oil as affected by spray calcium application. Colloids and Interfaces. 3(3). https://doi.org/10.3390/colloids3030058

Fahrullah, F., Radiati, L.E., Purwadi, P., Rosyidi, D. 2020a. The effect of different plasticizers on the characteristics of whey composite edible film. Jurnal Ilmu dan Teknologi Hasil Ternak. 15(1), 31-37. https://doi.org/10.21776/ub.jitek.2020.015.01.4

Fahrullah, F., Radiati, L.E., Purwadi., Rosyidi, D. 2020b. The physical characteristics of whey based edible film added with konjac. Current Research in Nutrition and Food Science. 8(1), 333-339. https://doi.org/10.12944/CRNFSJ.8.1.31

Fahrullah, F., Ervandi, M. 2021. Mikrostruktur edible film whey dangke dengan penambahan karagenan dan plasticizer sorbitol 35 %. Jurnal Ilmu dan Teknologi Peternakan Tropis. 8(1), 26-31. https://doi.org/10.33772/jitro.v8i1.14785

Fahrullah, F., Ervandi, M., Rosyidi, D. 2021. Characterization and antimicrobial activity of whey edible film composite enriched with clove essential oil. Tropical Animal Science Journal. 44(3), 369-375. https://doi.org/10.5398/tasj.2021.44.3.369

Fridayanti, A., Hendradi, E., Isnaeni, I. 2010. Pengaruh kadar polietilen glikol (PEG) 400 terhadap pelepasan natrium diklofenak dari sediaan transdermal patch type matriks. Journal Of Tropical Pharmacy And Chemistry. 1(1), 4–10. https://doi.org/10.25026/jtpc.v1i1.1

Hassan, B., Chatha, S.A.S., Hussain, A.I., Zia, K.M., Akhtar, N. 2018. Recent advances on polysaccharides, lipids and protein based edible films and coatings: A review. In International Journal of Biological Macromolecules. 109, 1095-1107.https://doi.org/10.1016/j.ijbiomac.2017.11.097

Jia, D., Fang, Y., Yao, K. 2009. Water vapor barrier and mechanical properties of konjac glucomannan-chitosan-soy protein isolate edible films. Food and Bioproducts Processing. 87(1), 7-10. https://doi.org/10.1016/j.fbp.2008.06.002

Kamsiati, E., Herawati, H., Purwani, E.Y. 2017. Potensi pengembangan plastik biodegradable berbasis pati sagu dan ubi kayu di Indonesia. Jurnal Penelitian dan Pengembangan Pertanian. 36(2), 67-76.

Li, X., Jiang, F., Ni, X., Yan, W., Fang, Y., Corke, H., Xiao, M., 2015. Preparation and characterization of konjac glucomannan and ethyl cellulose blend films. Food Hydrocolloids. 44, 229-236. https://doi.org/10.1016/j.foodhyd.2014.09.027

Marpongahtun, C.F.Z., 2016. Physical-mechanical properties and microstructure of breadfruit starch edible films with various plasticizer. Eksakta. 13(1), 56-62. https://doi.org/10.20885/eksakta.vol13.iss1-2.art7

Maruddin, F., Ratmawati, R., Fahrullah, F., Taufik, M. 2018. Karakterisitik edible film berbahan whey dangke dengan penambahan karagenan. Jurnal Veteriner, 19(2), 291-297. https://doi.org/10.19087/jveteriner.2018.19.2.291

Mostafavi, F.S., Kadkhodaee, R., Emadzadeh, B., Koocheki, A. 2016. Preparation and characterization of tragacanth-locust bean gum edible blend films. Carbohydrate Polymers. 139, 20-27. https://doi.org/10.1016/j.carbpol.2015.11.069

Prasetyaningrum, A., Rokhati, N., Kinasih, D. N., Wardani, F.D.N. 2010. Karakterisasi bioactive edible film dari komposit alginat dan lilin lebah sebagai bahan pengemas makanan biodegradable. Seminar Rekayasa Kimia Dan Proses.

Purnavita, S., Subandriyo, D.Y., Anggraeni, A. 2020. Penambahan gliserol terhadap karakteristik bioplastik dari komposit pati aren dan glukomanan. Metana: Media Komunikasi Rekayasa Proses dan Teknologi Tepat Guna. 16(1), 19-25. https://doi.org/10.14710/metana.v16i1.29977

Qiao, X., Tang, Z., Sun, K. 2011. Plasticization of corn starch by polyol mixtures. Carbohydrate Polymers. 83(2), 659-664. https://doi.org/10.1016/j.carbpol.2010.08.035

Rhim, J.W., Wang, L.F. 2013. Mechanical and water barrier properties of agar/κ-carrageenan/konjac glucomannan ternary blend biohydrogel films. Carbohydrate Polymers, 96(1), 71-81. https://doi.org/10.1016/j.carbpol.2013.03.083

Saberi, B., Chockchaisawasdee, S., Golding, J.B., Scarlett, C.J., Stathopoulos, C.E. 2017. Physical and mechanical properties of a new edible film made of pea starch and guar gum as affected by glycols, sugars and polyols. International Journal of Biological Macromolecules. 104, 345-359. https://doi.org/10.1016/j.ijbiomac.2017.06.051

Sinaga, L.L., Rejekina, M.S., Sinaga, M.S. 2013. Karakteristik edible film dari ekstrak kacang kedelai dengan penambahan tepung tapioka dan gliserol sebagai bahan pengemas makanan. Jurnal Teknik Kimia USU. 2(4), 12-16. https://doi.org/10.32734/jtk.v2i4.1485

Wang, K., Wu, K., Xiao, M., Kuang, Y., Corke, H., Ni, X., Jiang, F. 2017. Structural characterization and properties of konjac glucomannan and zein blend films. International Journal of Biological Macromolecules. 105, 1096-1104. https://doi.org/10.1016/j.ijbiomac.2017.07.127

Wang, L., Auty, M.A.E., Kerry, J.P. 2010. Physical assessment of composite biodegradable films manufactured using whey protein isolate, gelatin and sodium alginate. Journal of Food Engineering, 96(2), 199-207. https://doi.org/10.1016/j.jfoodeng.2009.07.025

Wang, W., Johnson, A. 2013. Introduction of konjac. Technical Article, 9–11.

Wei, X., Pang, J., Zhang, C., Yu, C., Chen, H., Xie, B. 2015. Structure and properties of moisture-resistant konjac glucomannan films coated with shellac/stearic acid coating. Carbohydrate Polymers. 118, 119-215. https://doi.org/10.1016/j.carbpol.2014.11.009

Wu, K., Zhu, Q., Qian, H., Xiao, M., Corke, H., Nishinari, K., Jiang, F. 2018. Controllable hydrophilicity-hydrophobicity and related properties of konjac glucomannan and ethyl cellulose composite films. Food Hydrocolloids. 79, 301-309. https://doi.org/10.1016/j.foodhyd.2017.12.034