PERBAIKAN KUALITAS KADAR AIR DAN KADAR KOTORAN CRUDE PALM OIL (CPO) PADA MESIN PURIFIER  MENGGUNAKAN KAIZEN DI PT. ACL

Nina Hairiyah; Ma'ratus Sholikhah

doi:10.21107/agrointek.v17i2.13165

PERBAIKAN KUALITAS KADAR AIR DAN KADAR KOTORAN CRUDE PALM OIL (CPO) PADA MESIN PURIFIER MENGGUNAKAN KAIZEN DI PT. ACL

Nina Hairiyah, Ma'ratus Sholikhah

Abstract

Moisture content and dirt content are important parameters to determine the quality of Crude Palm Oil (CPO) products produced by Palm Oil Mills. In recent periods, the quality of moisture content and dirt content at the clarification station for the purifier machine at PT. ACL does not meet the specified standards, namely for moisture content of more than 0.2% and impurities content of more than 0.5% for CPO samples coming out of the purifier machine. This research was conducted to improve the quality of the water content and dirt content of CPO on the purifier machine using kaizen at PT. ACL. The results of the kaizen analysis using the 5W+1H method were applied to take corrective actions. Based on observations, after corrective action was taken, the results obtained moisture content and dirt content that did not exceed the established standards so as to improve the quality of CPO produced by PT. ACL.

Keywords

Crude Palm Oil (CPO); dirt content; imrove quality; kaizen; moisture content; Palm Oil Mills

Full Text:

PDF (Bahasa Indonesia)

References

Baraba, S.A., Rahajeng, D.P., Aurellia, K., Oseasky, A.B. 2021. Pengendalian Kualitas Produk dengan Penerapan Kaizen 5s dan Metode Seven Tools pada PT. Bali Es. Seminar dan Konferensi Nasional IDEC 2021. 26-27 Juli 2021. ISSN: 2579-6429.

Ekky, H., Wirawati, S.M., Gunawan, W. 2020. Usulan rencana perbaikan kualitas produk komponen vamp dengan pendekatan metode gemba kaizen (5w+2h) di PT. Masterina grafika esprinta. Journal of Industrial Engineering & Management Research, 1(2), 173-183. https://doi.org/10.7777/jiemar.v1i2.52.

Fatkhurrohman, A., Subawa, S. 2016. Penerapan Kaizen Dalam Meningkatkan Efisiensi Dan Kualitas Produk Pada Bagian Banbury PT Bridgestone Tire Indonesia. JURNAL Administrasi Kantor, 4(1), 14 - 31. Retrieved from http://www.ejournal-binainsani.ac.id/index.php/JAK/article/view/12.

Hairiyah, N., Amalia, R.R., Nugroho, I.K. 2020. Penerapan six sigma dan kaizen untuk memperbaiki kualitas roti di ud cj bakery. Jurnal Teknologi & Industri Hasil Pertanian, 25(1), 35–43. DOI: http://dx.doi.org/10.23960/jtihp.v25i1.35-43.

Kementerian Koordinator Bidang Perekonomian Republik Indonesia. 2021. Roadmap Hilirisasi Produk Kelapa Sawit untuk Menjadikan Indonesia sebagai Price Center bagi CPO Global. https://ekon.go.id/publikasi/detail/3447/roadmap-hilirisasi-produk-kelapa-sawit-untuk-menjadikan-indonesia-sebagai-price-center-bagi-cpo-global.

Marpaung, A.D., Susilawati, W., Is, A. 2017. Optimasi Produksi Crude Palm Oil (Cpo) dan Inti Sawit (Kernel) Studi Kasus PT. Mega Sawindo Perkasa. Jurnal Agri Sains, vol. 1, no. 2, 29 Dec. 2017, doi:10.36355/jas.v1i2.150.

Marriauwaty, D., Fajrah, N. 2020. Analisis Pengendalian Kualitas Produk Kapasitor di PT XYZ Batam. Journal of Industrial Engineering & Management Research, 1(1), 43-52. https://doi.org/10.7777/jiemar.v1i1.25.

Nabila, K., Rochmoeljati, R. 2020. Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dan Perbaikan Dengan Kaizen. JUMINTEN, 1(1), 116-127. https://doi.org/10.33005/juminten.v1i1.27.

Putri, W. 2021. Pengenalan Alat dan Proses Pengolahan Kelapa Sawit serta Biogas Plant di PT. Perkebunan Nusantara III Pabrik Kelapa Sawit Hapesong, Tapanuli Selatan, Sumatera Utara. Internship Report III thesis, Politeknik LPP.

Suandi, A., Supardi, N.I., Puspawan A. 2016. Analisa Pengolahan Kelapa Sawit dengan Kapasitas Olah 30 ton/jam di PT. BIO Nusantara Teknologi. Teknosia vol 2 (17).

Supriyanto, G. 2007. Analisa Minyak Hilang Selama Proses Pengolahan CPO Akibat Lama Perebusan Tandan Buah Segar. Agroteknose Vol 3 (2) 8-15.

Zulbahri, A.P. 2019. Analisis proses pemisah kadar crude Palm oil (CPO) di PTP NUSANTARA I Tanjung Seumantoh-Aceh Tamiang. JURNAL HADRON, 1(1), 5-8. Retrieved fromhttps://ejurnalunsam.id/index.php/jh/article/view/1530

Yusmartato, Parinduri, L. 2018. Perbaikan Alat Pengutip Minyak Dalam Sludge Dan Condensat. Buletin Utama Teknik Vol. 13, No. 3. 206-210.