Effect of Waste Marble Stone Fractions in Porous Asphalt Mixtures  for Quality Improvement

M Sa'dillah; Blima Oktaviastuti; Yoskario Darman Malo

doi:10.21107/rekayasa.v18i3.29329

Effect of Waste Marble Stone Fractions in Porous Asphalt Mixtures for Quality Improvement

M Sa'dillah, Blima Oktaviastuti, Yoskario Darman Malo

Abstract

Improving road transportation accessibility is essential for enhancing local social and economic activity in a country. One way to maintain the accessibility of the road network and ensure that users feel safe and comfortable is to maintain an adequate pavement surface layer throughout the duration of the network. Prolonged rain becomes one of the problems of paving the road surface. aims to achieve the following: (1) to determine the Marshall strength of the optimum asphalt content (OAC) value in the porous asphalt mixture; and (2) to determine the effect of the use of marble stone fraction waste on the characteristics of porous asphalt mixtures. Research method uses experimental research in the laboratory. Research will be conducted using the Australian Asphalt Pavement Association (AAPA) 2004 approach method. Research was conducted with Pen 60/70 asphalt content of 4%, 4.5%, 5%, 5.5%, and 6% to find the optimum asphalt content value, then it will be added with a ratio of 0%, 15%, 25%, and 35% marble fraction waste material to the total OAC weight. Results of the analysis of the Marshall characteristics of the porous asphalt mixture with a variation of 25% marble content have met the specifications on the grounds that all parameters have met the requirements of the Australian Asphalt Pavement Association (AAPA 2004) with a VIM value at 25% content of 18.61%, for a VMA value of 50.60%, while for a stability value of 508 kg and for a flow value obtained of 2.57 mm while for an MQ value of 262.46 kg/mm.

Keywords

marble fractures, transportation access, pavement surface road, asphalt porous

Full Text:

PDF

References

Amal, A. S., & Saputra, W. (2019). Pemanfaatan Limbah Abu Marmer Sebagai Filler Terhadap Karakteristik Marshall Pada Campuran Lapis Tipis Aspal Pasir (Latasir) B. Jurnal Media Teknik Sipil, 16(2), 67–78. https://doi.org/10.22219/jmts.v16i2.6744

Anam, S., & Pratikto, H. (2018). PENGUJIAN PERKERASAN ASPAL PORUS DENGAN PENAMBAHAN TREAD BAN BEKAS PADA UJI MARSHALL Fakultas Teknik Universitas Kadiri. Ukarst : Jurnal Universitas Kadiri Riset Teknik Sipil, 2(2), 154–163.

Arlia, L., Saleh, S. M., & Anggraini, R. (2018). Karakteristik Campuran Aspal Porus Dengan Substitusi Gondorukem Pada Aspal Penetrasi 60/70. Jurnal Teknik Sipil, 1(3), 657–666. https://doi.org/10.24815/jts.v1i3.10011

Australian Asphalt Pavement Association (AAPA). (2004). Open Graded Asphalt - Implementation Design Guide. 1, 40.

Dendo, E. A. R. (2018). Pemanfaatan Limbah Marmer Sebagai Bahan Perkerasan Jalan Pada Campuran Hot Rolled Sheet – Binder Course. Journal Dynamic Saint, 3(1), 486–503. https://doi.org/10.47178/dynamicsaint.v3i1.272

Fauziah, M., & Wijayati, F. S. (2016). Pengaruh Kadar Limbah Kaca Sebagai Substitusi Agregat Halus Terhadap Karakteristik Campura Aspal Porus. Jurnal Teknisia, XXI(ISSN 0853-8557), 1–13.

Isma, L., Mulizar, M., & Aiyub, A. (2021). Karakteristik Marshall Campuran Aspal Menggunakan Aditif (Polyethylene Terephthalate). Jurnal Sipil Sains Terapan, 1(2004), 657–666.

Jebur, Y. M., Falah, M. W., Kadhim, M. A., Imran, M. K., Hashim, T. M., Obeid, Z. S., Hussien, S. A., & Kadhim, R. H. (2024). Effect of Filler Type and Content on The Mechanical Properties of Asphalt Mixtures. AIP Conference Proceedings, 3009(1). https://doi.org/10.1063/5.0190471

Jwaida, Z., Al Quraishy, Q. A., Almuhanna, R. R. A., Dulaimi, A., Bernardo, L. F. A., & Andrade, J. M. de A. (2024). The Use of Waste Fillers in Asphalt Mixtures: A Comprehensive Review. CivilEng, 5(4), 801–826. https://doi.org/10.3390/civileng5040042

Kementerian Energi dan Sumber Daya Mineral. (2019). Productin volume of marble in Indonesia from 2012 to 2022 (Vol. 2019). https://www.statista.com/statistics/706786/production-of-palm-oil-in-indonesia/

Kementerian Pekerjaan Umum dan Perumahan Rakyat; Direktorat Jenderal Bina Marga. (2010). Spesifikasi Umum 2010 (Revisi 3) Divisi 6 (pp. 1–89).

Kementerian Pekerjaan Umum Direktorat Jendral Bina marga. (2010). Spesifikasi Umum 2010 (Rev 3) Final.

Kementerian PUPR. (2024). Buku Kondisi Jalan Nasional 2022 Semester 1. In Ditjen Binar Marga. https://data.goodstats.id/statistic/kemantapan-jalan-nasional-capai-942-pada-2023-102eb

M. Sa’dillah, Blima Oktaviastuti, & Marselinus Risaldo Lensa. (2025). Porous Asphalt Innovation: Evaluation of Marshall Characteristics of Porous Asphalt with Marble Waste as an Additive. Jurnal Teknik Sipil Dan Lingkungan, 10(1), 193–202. https://doi.org/10.29244/jsil.10.1.193-202

Mohd Shukry, N. A., Hassan, N. A., Abdullah, M. E., Hainin, M. R., Md Yusoff, N. I., Jaya, R. P., & Mohamed, A. (2018). Effect of various filler types on the properties of porous asphalt mixture. IOP Conference Series: Materials Science and Engineering, 342(1). https://doi.org/10.1088/1757-899X/342/1/012036

Mulatu, A., Quezon, E. T., & Gudina, O. (2021). Evaluation of the HMA performance using combined effects of marble waste dust filler and superpave aggregate gradation. Australian Journal of Civil Engineering, 19(2), 184–194. https://doi.org/10.1080/14488353.2020.1854942

Nukar, M. S., Sadillah, M., & Oktaviastuti, B. (2024). Effect of Marble Powder Waste as Fine Aggregate Substitution in Rigid Pavement. Fondasi : Jurnal Teknik Sipil, 13(2), 249–261.

Pasandín, A. R., & Pérez, I. (2018). Laboratory evaluation of hot-mix asphalt containing construction and demolition waste. Construction and Building Materials, 43, 497–505. https://doi.org/10.1016/j.conbuildmat.2013.02.052

Putri. (2019). Pemakaian Limbah Aspal Sebagai Subtitusi Agregat Pada Campuran Aspal Porus. Rekayasa Teknik Sipil.

Putri, E. E., Hermistanora, H., & Adji, B. M. (2020). Studi Penggunaan Limbah Styrofoam Pada Perkerasan Aspal Porus. Rang Teknik Journal, 3(2), 167–172. https://doi.org/10.31869/rtj.v3i2.1705

Rahma, P. D., Malo, Y. S., Sipil, J. T., Teknik, F., Tunggadewi, U. T., Warna, J. T., Malang, K., & Timur, J. (2023). Pengaruh Penggunaan Biji Plastik Jenis Ps ( Polystyrene ). Rekayasa Jurnal Teknik Sipil Universitas Madura, 8(2).

Rahman, M. T., Mohajerani, A., & Giustozzi, F. (2020). Recycling of waste materials for asphalt concrete and bitumen: A review. Materials, 13(7). https://doi.org/10.3390/ma13071495

Rahmawati, A., & Hidayat, R. N. (2021). Kinerja Campuran Aspal Porus yang Dimodifikasi dengan Lateks. Semesta Teknika, 24(1), 47–61. https://doi.org/10.18196/st.v24i1.11724

Reynaldo. (2017). Ketua Penyunting : Penyunting : Penyunting Pelaksana : Redaksi : Jurusan Teknik Sipil ( A4 ) FT UNESA Ketintang - Surabaya Email : REKATS. Rekayasa Teknik Sipil Vol., 1(1), 144–155.

Sa’dillah, M., & Leliana, A. (2020). Karakteristik Aspal Beton Lapis Aus ( AC-WC ) Dengan Penambahan Bahan Pengisi Abu Terbang Batubara. Prosiding SENTIKUIN (Seminar Nasional Teknologi Industri, Lingkungan Dan Infrastruktur), 3, 1–8.

Sarwono, D., & Wardhani, A. K. (2007). Pengukuran Sifat Permeabilitas Campuran Porous Asphalt. Media Teknik Sipil, 131–138.

Sembung, N. T., Sendow, T. K., & Palenewen, S. (2020). Analisa Campuran Aspal Porus Menggunakan Material Dari Kakaskasen Kecamatan Tomohon Utara Kota Tomohon. Jurnal Sipil Statik, 8(3), 345–352.

Sembung, N. T., Sendow, T. K., Palenewen, S., Teknik, F., Sipil, J., Sam, U., & Manado, R. (2020). Analisa Campuran Aspal Porus Menggunakan Material Dari Kakaskasen Kecamatan Tomohon Utara Kota Tomohon. Jurnal Sipil Statik, 8(3), 345–352.

Soelarso, Baehaki, & Sidik, N. F. (2016). Pengaruh Penggunaan Limbah Beton Sebagai Pengganti Agregat Kasar Pada Beton Normal Terhadap Kuat Tekan Dan Modulus Elastisitas. Jurnal Pondasi, 5(2), 22–29.

Victory, W. (2022). A review on the utilization of waste material in asphalt pavements. Environmental Science and Pollution Research, 29(18), 27279–27282. https://doi.org/10.1007/s11356-021-18245-0

Xiao, F., Herndon, D. A., Amirkhanian, S., & He, L. (2018). Aggregate gradations on moisture and rutting resistances of open graded friction course mixtures. Construction and Building Materials, 85, 127–135. https://doi.org/10.1016/j.conbuildmat.2015.03.095

Zhang, H., Li, H., Zhang, Y., Wang, D., Harvey, J., & Wang, H. (2018). Performance enhancement of porous asphalt pavement using red mud as alternative filler. Construction and Building Materials, 160, 707–713. https://doi.org/10.1016/j.conbuildmat.2017.11.105