Waste Analysis Of Pasted Woven Production Process Using Lean Six Sigma Method
Abstract
This research was conducted in a company engaged in the production of cement bags which include pasted woven, pasted kraft, and sewn woven. Waste is still generated on the production floor throughout the pasted weaved manufacturing process. The essential waste that happens, including faults, waiting, Environmental, Health, and Safety, as well as other problems that cause the lead time to be too lengthy, namely 1430 minutes. The goal of this study is to assess the degree of waste that happens by calculating Defects Per Million Opportunities and the sigma level, as well as to make recommendations for improvement. The research results show that the reduction in lead time for waste of non-value-added defects in the pasted woven production process, which was originally worth 1430 minutes, can be reduced to 1365 minutes by reducing activities in the form of a 65-minute delay, thereby reducing cycle time in the pasted woven production process. The average DPMO value was 36898 at a sigma level of 3.284. Proposed modifications to decrease waste are analyzed using Failure Mode and Effect Analysis and Risk Priority Number values to identify the sources of waste. Recommendations for companies provide training to operators to avoid human error, inspect raw materials before entering the production process and periodically control the condition of machines.
Keywords
Full Text:
PDFReferences
Arum Bella Adelia, A. Z. A.-F. (2022). Analisis Pengendalian Kualitas Produk Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Dan Six Sigma (Studi Kasus: Ps Madukismo). Jurnal Cakrawala Ilmiah, 1(11).
Aziza, N., & Afandi, M. (2018). Analisis Defect Dan Kualitas Produk Writing and Printing Paper Dengan Six Sigma. Teknika: Engineering and Sains Journal, 2(1), 73. https://doi.org/10.51804/tesj.v2i1.266.73-78
Baharudin, I., Purwanto, A. J., & Fauzi, M. (2021). Analisis Pemborosan Menggunakan “9 Waste" Pada Proses Produksi Pt Abc. Jurnal Ilmiah Teknologi Infomasi Terapan, 8(1), 187–192. https://doi.org/10.33197/jitter.vol8.iss1.2021.745
Bob Anthony, M. (2021). Analisis Penyebab Kerusakan Unit Pompa Pendingin AC dan Kompresor menggunakan Metode FMEA. Jurnal Teknologi, 11(1), 5–13. https://doi.org/10.35134/jitekin.v11i1.24
Dhinar, A. P., Widiana, D. R., Kusminah, I. L., & Nabil, A. (2023). Analisis Probabilitas Human Error pada Pekerjaan Printing Flexo Roll To Roll Menggunakan Metode Human Error Assessment and Reduction Technique. 1(1), 63–71.
Hairiyah, N., Amalia, R. R., & Nuryati, N. (2022). Peningkatan Produktivitas Amplang Menggunakan Lean Six Sigma Di Ud Kelompok Melati. Agrointek : Jurnal Teknologi Industri Pertanian, 16(1), 45–53. https://doi.org/10.21107/agrointek.v15i4.9973
Havi, N. F., Lubis, M. Y., & Yanuar, A. A. (2018). Penerapan Metode 5S Untuk Meminimasi Waste Motion Pada Proses Produksi Kerudung Instan Di Cv . Xyz Dengan Pendekatan Lean Manufacturing. Jurnal Integrasi Sistem Industri, 5(2), 55–62.
Hesthi, A., Ningtyas, P., Pahlawan, I. A., Muhamadin, R. C., Dagmar, A. V., Studi, P., Mesin, T., Teknik, F., & Gresik, U. M. (2023). Analisa Tegangan Pada Rangka Sepeda. Jurnal Sistem dan Teknik Industri. 3(4), 514–519.
Joes, S., Salomon, L. L., & Daywin, F. J. (2023). Penerapan Lean Six Sigma Untuk Meningkatkan Efisiensi Dan Kualitas Produk Kemasan Food Pail Pada Perusahaan Percetakan. Jurnal Ilmiah Teknik Industri, 10(3), 224–236. https://doi.org/10.24912/jitiuntar.v10i3.21188
Komariah, I. (2022). Penerapan Lean Manufacturing Untuk Mengidentifikasi Pemborosan (Waste) Pada Produksi Wajan Menggunakan Value Stream Mapping (Vsm) Pada Perusahaan Primajaya Alumunium Industri Di Ciamis. Jurnal Media Teknologi, 8(2), 109–118. https://doi.org/10.25157/jmt.v8i2.2668
Lestari, R. C., Handayani, K. F., Firmansah, G. G., & Fauzi, M. (2022). Upaya Meminimalisasi Cacat Produk Dengan Implementasi Metode Lean Six Sigmas. Jurnal Bayesian : Jurnal Ilmiah Statistika Dan Ekonometrika, 2(1), 82–92. https://doi.org/10.46306/bay.v2i1.31
Munandar, A., & Permana, D. S. (2020). Analisis Waste Produksi Celana Dengan Metode Lean Six Sigma Pada Area Sewing Line 5 Di PT. XYZ. Rekayasa Industri Dan Mesin (ReTIMS), 1(2), 89. https://doi.org/10.32897/retims.2020.1.2.327
Nurfitri Imro’ah, S. H. N. S. (2019). Implementasi Metode Lean Six Sigma Pada Produksi Wajan Nomor 18 Di Cv. Xyz. Bimaster : Buletin Ilmiah Matematika, Statistika Dan Terapannya, 8(2), 263–272. https://doi.org/10.26418/bbimst.v8i2.32350
Pattiapon, M. L., Maitimu, N. E., & Magdalena, I. (2020). PENERAPAN LEAN MANUFACTURING GUNA MEMINIMASI WASTE PADA LANTAI PRODUKSI (Studi Kasus: UD. FILKIN). Arika, 14(1), 23–36. https://doi.org/10.30598/arika.2020.14.1.23
Rimantho, D., & Athiyah. (2018). Analisis Kapabilitas Proses Untuk Pengendalian Kualitas Air Limbah Di Industri Farmasi. Jurnal Teknologi, 11(1), 1–8. https://dx.doi.org/10.24853/jurtek.11.1.1-8
Romadhani, F., Mahbubah, N., & Kurniawan, M. D. (2021). Implementasi Metode Lean Six Sigma Guna Mengeliminasi Defect Pada Proses Produksi Purified Gypsum Di Pt. Aaa. RADIAL : Jurnal Peradaban Sains, Rekayasa Dan Teknologi, 9(2), 89–103. https://doi.org/10.37971/radial.v9i2.224
Sarman, S., & Soediantono, D. (2022). Literature Review of Lean Six Sigma (LSS) Implementation and Recommendations for Implementation in the Defense Industries. Journal of Industrial Engineering & Management Research, 3(2), 24–34. https://jiemar.org/index.php/jiemar/article/view/273
Somadi, S. (2020). Evaluasi Keterlambatan Pengiriman Barang dengan Menggunakan Metode Six Sigma. Jurnal Logistik Indonesia, 4(2), 81–93. https://doi.org/10.31334/logistik.v4i2.1110
Suseno, & Taufik Alfin Ashari. (2022). Analisis Pengendalian Kualitas Produk Base Plate Dengan Menggunakan Metode Lean Six Sigma (Dmaic) Pada Pt Xyz. Jurnal Cakrawala Ilmiah, 1(6), 1321–1332. https://doi.org/10.53625/jcijurnalcakrawalailmiah.v1i6.1498
Triagus Setiyawan, D., Soeparman, S., & Soenoko, R. (2014). Minimasi Waste Untuk Perbaikan Proses Produksi Kantong Kemasan Dengan Pendekatan Lean Manufacturing. Journal of Engineering and Management Industial System, 1(1), 8–13. https://doi.org/10.21776/ub.jemis.2013.001.01.2
Utomo, Y., Jumali, A., & Salsabila, N. (2022). Di Pt Temprina Media Grafika (Jawa Pos Group). Jurnal Teknik , Volume 20, 103–109.
Wicaksono, A., Dhartikasari Priyana, E., & Pandu Nugroho, Y. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Pada Pompa Sentrifugal Di PT. X. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 9(1), 177. https://doi.org/10.24014/jti.v9i1.22233
Yoseph, Kosasih, W., & Doaly, C. O. (2023). Peningkatan Produktivitas Dan Kualitas Pada Lini Produksi Drum Menggunakan Pendekatan Lean Six Sigma. Jurnal Mitra Teknik Industri, 2(1), 90–101. https://doi.org/10.24912/jmti.v2i1.25531
DOI
https://doi.org/10.21107/rekayasa.v17i2.25646Metrics
Refbacks
- There are currently no refbacks.
Copyright (c) 2024
![Creative Commons License](http://licensebuttons.net/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.