Pengaruh Massa Perekat Tapioka Terhadap Durabilitas Biobriket dari Arang Kulit Singkong
Abstract
Commercially competitive in the global market, bio-briquettes derived from coconut shell charcoal have been extensively manufactured and meet all standard prerequisites. Bio-briquettes sourced from different biomass materials, with calorific values that meet the criteria, have not entered commercial production. Currently, they remain in the research and development phase. One of the reasons is the suboptimal durability value of the bio-briquettes, causing the products to easily break during distribution and usage. This research aims to determine the optimal amount of binder in the production of bio-briquettes from cassava peels. This is because cassava peels have calorific values that meet the requirements and have a huge potential for commercial-scale production. This study utilizes cassava peel charcoal as the raw material mixed with tapioca binder in variations of 9%, 10%, 11%, 12%, and 13% of the cassava peel charcoal mass. The optimal percentage of tapioca binder mass was found at 9% with a durability value of 99.54%, density 1 g/cm3 and water content 5.39%.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
Adebayo, K., & Seck, A. (2020). West Africa Competitiveness Programme Regional Investment Profile - Summary - Cassava Value Chain. Geneva.
Anggraeni, S., Hofifah, S. N., Nandiyanto, A. B. D., & Bilad, M. R. (2021). Effects of Particle Size and Composition of Cassava Peels and Rice Husk on The Briquette Performance. Journal of Engineering Science and Technology, 16(1), 527–542.
Badan Pusat Statistik. (2015). Produksi Ubi Kayu Menurut Provinsi (ton), 1993-2015. Retrieved September 19, 2022, from https://www.bps.go.id/linkTableDinamis/view/id/880
BSN. (2000). SNI 01-6235-2000 tentang Briket Arang Kayu. Jakarta: Badan Standar Nasional.
Bureau of Indian Standards. (2022). Solid Biofuels — Fuel Specification and Classes — Briquettes From Agro and Herbaceous Residues.
Cesprini, E., Greco, R., Causin, V., Urso, T., Cavalli, R., & Zanetti, M. (2021). Quality assessment of pellets and briquettes made from glued wood waste. European Journal of Wood and Wood Products, 79, 1153–1162. https://doi.org/10.1007/s00107-021-01695-1
D Nurba, M Yasar, Mustaqimah, Fadhil, R., S P Sari, & C V Mysa. (2019). Performance of Corncobs and Wood Charcoal Briquette as Heat Energy Sources in In-Store Dryer. In IOP Conference Series: Earth and Environmental Science 365 (pp. 1–10). https://doi.org/10.1088/1755-1315/365/1/012048
Davies, R. M., & Davies, O. A. (2017). Effect of Density on the Some Thermal Characteristics of Briquettes at Different Levels of Binder, Pressure and Particle Sizes. International Journal of Emerging Engineering Research and Technology, 5(7), 1–7.
EsauMwinuka, T. (2015). Effects of Process Parameters on the Density and Durability of Biomass Briquettes Made from Wet Method. International Journal of Engineering Research and Development, 11(1), 32–38.
Firdaus, A., & Octavianus, B. (2021). Biobrickets Made from Cassava Skin Waste Utilizing Banana Plastic Waste Glue and Water Hyacinth. Indonesian Journal of Engineering and Science, 2(2), 7–13.
Fitriyano, G., Ismiyati, I., Purnawan, I., Othman, R., & Ramadhan, R. F. (2023). Mini Review: Potential Utilization of Cassava Peel Waste as Raw Material for Bio Briquettes Production in Indonesia. In E3S Web of Conferences (p. 10). EDP Sciences. https://doi.org/https://doi.org/10.1051/e3sconf/202343200011
Food and Agriculture Organization. (2020). Top 10 Country Production of Cassava. Retrieved September 19, 2022, from https://www.fao.org/faostat/en/#rankings/countries_by_commodity
Hirniah, F. E. (2020). Analisis Energi dalam Pembuatan Briket Arang dari Kulit Singkong dengan Tepung Tapioka sebagai Perekat. UNIVERSITAS JEMBER.
Karunanithy, C., Wang, Y., Muthukumarappan, K., & Pugalendhi, S. (2012). Physiochemical Characterization of BriquettesMade from Different Feedstocks. Biotechnology Research International, 12.
O.A. Oyelaran, B.O. Bolaji, M.A. Waheed, & M.F. Adekunle. (2014). Effects of Binding Ratios on Some Densification Characteristics of Groundnut Shell Briquettes. Iranica Journal of Energy & Environment, 5(2), 167–172. https://doi.org/10.5829/idosi.ijee.2014.05.02.08
O.A. Oyelaran, O. Balogun, A.O. Ambali, & Abidoye, J. K. (2017). Characterization of Briquette Produced from Tannery Solid Waste. Journal Of Materials And Engineering Structures, 4, 79–86.
Rumiyanti, L., Irnanda, A., & Hendronursito, Y. (2018). Analisis Proksimat Pada Briket Arang Limbah Pertanian. Jurnal Fisika Dan Aplikasinya, 3(1), 15–22. https://doi.org/doi.org/10.21009/Spektra.031.03
Terhider, U. E., & Ediba, O. E. (2021). Investigation of The Combustion Characteristics of Briquettes Produced From Cassava Peels, Mango Nuts and Orange Peels. International Research Journal of Modernization in Engineering Technology and Science, 3(10), 736–742.
DOI
https://doi.org/10.21107/rekayasa.v17i2.22549Metrics
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Gema Fitriyano
![Creative Commons License](http://licensebuttons.net/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.