Sizing Optimization Using Genetic Algorithm to Achieve Minimal Offshore Structure

Ferdita Syalsabila; Rudi Walujo Prastianto; Daniel Mohammad Rosyid

doi:10.21107/rekayasa.v15i2.15102

Sizing Optimization Using Genetic Algorithm to Achieve Minimal Offshore Structure

Ferdita Syalsabila, Rudi Walujo Prastianto, Daniel Mohammad Rosyid

Abstract

Accelerating marginal field development must consider the economic factor. While the structural strength must remain capable and robust when subjected to environmental loads. To meet the desired objective in design phase, optimization is used. With the rapid growth of computing technology, the optimization method is developed as more advanced and reduced iteration time. However, the structural evaluation of jacket structure is a complex problem. The usual process of structure evaluation is through finite element analysis, and it is still time-consuming. Thus, surrogate models can evaluate the structure, lowering computational time. This study optimizes the jacket structure to get an affordable and robust minimal jacket structure. Sizing optimization will be performed on the jacket's leg and bracing thickness. For single-objective optimization, weight structure is considered the objective function, and multi-objective optimization adds production cost as the second objective function. The surrogate model uses the radial basis function to predict the relation between design variables and ultimate limit strength. The functions generated from the surrogate model will act as behaviour constraints in the optimization process. For consideration, X-type and V-type bracing configurations are compared. Different results were obtained from the single objective and multi-objective optimization process.

Keywords

genetic algorithm, jacket structure, minimal offshore structure, optimization, radial basis function

Full Text:

PDF

References

AWS D1.1. (2010). Structural Welding Code Steel. In American Welding Society.

Bharti, K., Kumaraswamidhas, L. A., & Das, R. R. (2020). A novel optimization approach for bonded tubular gap K-joints made of FRP composites. Structures, 28(October), 2135–2145. https://doi.org/10.1016/j.istruc.2020.10.021

Burak, J., & Mengshoel, O. J. (2021). A multi-objective genetic algorithm for jacket optimization. GECCO 2021 Companion - Proceedings of the 2021 Genetic and Evolutionary Computation Conference Companion, 1549–1556. https://doi.org/10.1145/3449726.3463150

Chakrabarti, S. (2005). Handbook of Offshore Engineering (Volume I). Elsevier Ltd.

Dias, L., Bhosekar, A., & Ierapetritou, M. (2019). Adaptive Sampling Approaches for Surrogate-Based Optimization. In Computer Aided Chemical Engineering (Vol. 47). Elsevier Masson SAS. https://doi.org/10.1016/B978-0-12-818597-1.50060-6

Fu, F. (2018). Design and Analysis of Tall and Complex Structures (1st ed.). Butterworth-Heinemann.

Garcia-Teruel, A., & Forehand, D. I. M. (2021). A review of geometry optimisation of wave energy converters. Renewable and Sustainable Energy Reviews, 139(January), 110593. https://doi.org/10.1016/j.rser.2020.110593

Häfele, J., Damiani, R. R., King, R. N., Gebhardt, C. G., & Rolfes, R. (2018). A systematic approach to offshore wind turbine jacket predesign and optimization: Geometry, cost, and surrogate structural code check models. Wind Energy Science, 3(2), 553–572. https://doi.org/10.5194/wes-3-553-2018

Kartohardjono, S., & Prasetyo, D. D. (2020). Economic Study of Offshore Marginal Oil Field Development. International Journal of Advanced Science and Technology, 29(June).

Lee, C. C., Chung, P. C., Tsai, J. R., & Chang, C. I. (1999). Robust radial basis function neural networks. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 29(6), 674–685. https://doi.org/10.1109/3477.809023

Li, G., Liu, X., Liu, Y., & Yue, Q. (2008). Optimum design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints. Ocean Engineering, 35(5–6), 484–493. https://doi.org/10.1016/j.oceaneng.2007.12.005

Liu, D. P., Lin, T. Y., & Huang, H. H. (2020). Improving the computational eciency for optimization of oshore wind turbine jacket substructure by Hybrid Algorithms. Journal of Marine Science and Engineering, 8(8). https://doi.org/10.3390/JMSE8080548

Liu, Z., Fan, S., Wang, Y., & Peng, J. (2021). Genetic-algorithm-based layout optimization of an offshore wind farm under real seabed terrain encountering an engineering cost model. Energy Conversion and Management, 245, 114610. https://doi.org/10.1016/j.enconman.2021.114610

Melanie, M. (1999). Introduction to genetic algorithms. https://doi.org/10.1007/BF02823145

Motlagh, A. A., Shabakhty, N., & Kaveh, A. (2021). Design optimization of jacket offshore platform considering fatigue damage using Genetic Algorithm. Ocean Engineering, 227(October 2020), 108869. https://doi.org/10.1016/j.oceaneng.2021.108869

Nasseri, T., Shabakhty, N., & Hadi Afshar, M. (2014). Study of Fixed Jacket Offshore Platform in the Optimization Design Process under Environmental Loads. International Journal of Maritime Technology Ijmt, 2(January 2015), 75–84. http://ijmt.ir/browse.php?a_code=A-10-365-1&sid=1&slc_lang=en

Nisbet, R., Miner, G., & Yale, K. (2018). Basic Algorithms for Data Mining: A Brief Overview. Handbook of Statistical Analysis and Data Mining Applications, 121–147. https://doi.org/10.1016/b978-0-12-416632-5.00007-4

Noviyanti, I., Prastianto, R. W., & Murdjito, M. (2021). Stress Distribution Analysis of DKDT Tubular Joint in a Minimum Offshore Structure. Rekayasa, 14(2), 191–199. https://doi.org/10.21107/rekayasa.v14i2.10511

Sianturi, P. (2021). Optimism to Pursue Oil and Gas Production Target in 2030. Indonesian Petroleum Association. https://www.ipa.or.id/index.php/en/news/news/optimism-to-pursue-oil-and-gas-production-target-in-2030

Syalsabila, F., Prastianto, R. W., Hadiwidodo, Y. S., Adaalah, A. H., & Syarifudin, M. R. (2022). Structural Analysis of Floating Net Cage Bracket in Current and Wave. IOP Conference Series: Earth and Environmental Science, 972(1). https://doi.org/10.1088/1755-1315/972/1/012017

Thai, H. T. (2022). Machine learning for structural engineering: A state-of-the-art review. Structures, 38(January), 448–491. https://doi.org/10.1016/j.istruc.2022.02.003

Zhang, X., Song, X., Qiu, W., Yuan, Z., You, Y., & Deng, N. (2018). Multi-objective optimization of Tension Leg Platform using evolutionary algorithm based on surrogate model. Ocean Engineering, 148(December 2017), 612–631. https://doi.org/10.1016/j.oceaneng.2017.11.038