Reengineering Cracker-Dryer Machine Based on Fan speed and Temperature Considering Drying Time, Final Weight and Energy Consumption Factor

Emon Rifa'i, sabarudin ahmad, Anis Arendra, Rifky Maulana Yusron

Abstract

Redesign and building a cracker drying machine should give priority to several factors to find the optimal point, one of which is by conducting experimental experiments. This research was carried out to find out from the tool and also pay attention to several things, such as temperature and fan speed. If one of these factors is ignored, it will not produce dry crackers and the dried crackers are less than optimal. The Independent parameters used in this research are temperature and fan speed. Dependent parameters used in this research are concerning drying time, final weight, and energy consumption. Design experiment using Factorial 3x3. Fan speed has 3 levels, they are 1000rpm, 1500rpm and 2000rpm. The Temperature parameter has 3 levels, they are 16, 19, and 21oC. Based on the design of experiment results, it was found that the drying time response for the combination that has the highest ranking is at a temperature of 19oC with a 2000rpm fan speed resulting in a drying time of 182,677 minutes.

Full Text:

PDF

References

N. M. Hidayat, A. E. Pandiangan, and A. Pratiwi, “Identifikasi Perubahan Curah Hujan Dan Suhu Udara Menggunakan Rclimdex Di Wilayah Serang,” J. Meteorol. Klimatologi dan Geofis., vol. 5, no. 2, pp. 37–44, 2019, doi: 10.36754/jmkg.v5i2.57.

M. M. Sianita, N. Purwidiani, S. C. Wibawa, and N. Kusumawati, “Analisis Masa Simpan dan Kandungan Gizi Produk Kerupuk Ikan ‘ Sholawat Ummi ’ Analysis of Shelf Life and Nutritional Content of Fish Crackers ‘ Sholawat Ummi ,’” pp. 268–274, 2020.

A. Zulfahmi, F. Swastawati, and R. Romadhon, “Pemanfaatan Dagingikan Tenggiri (Scomberomorus Commersoni) Dengan Konsentrasi Yang Berbedapada Pembuatan Kerupuk Ikan,” J. Pengolah. dan Bioteknol. Has. Perikan., vol. 3, no. 4, pp. 133–139, 2014.

I. G. A. K. R. Handayani, E. As’Adi, G. Hamzah, T. Leonard, and G. Gunarto, “Relationship between energy consumption in international market and Indonesia prices regulation,” Int. J. Energy Econ. Policy, vol. 7, no. 5, pp. 9–15, 2017.

S. P. Türkoğlu and P. S. Ö. Kardoğan, “The role and importance of energy efficiency for sustainable development of the countries,” Lect. Notes Civ. Eng., vol. 7, no. January, pp. 53–60, 2018, doi: 10.1007/978-3-319-64349-6_5.

A. Jambor, “Determinants of CO 2 Emission : A Global Evidence,” no. November, 2018.

S. Saint Akadiri, F. V. Bekun, E. Taheri, and A. C. Akadiri, “Carbon emissions, energy consumption and economic growth: A causality evidence,” Int. J. Energy Technol. Policy, vol. 15, no. 2–3, pp. 320–336, 2019, doi: 10.1504/ijetp.2019.10019648.

B. G. Chudasama, S. M. Zofair, D. V Bhola, and T. H. Dave, “Development and characterization of fish crackers prepared from the bull’s eye (Priacanthus hamrur, Forsskal, 1775) fish meat and different starches,” J. Entomol. Zool. Stud., vol. 7, no. 3, pp. 401–406, 2019.

W. Zzaman, M. M. Yusoff, and T. A. Yang, “Preparation and properties of fish cracker from different freshwater fish species,” Int. Food Res. J., vol. 24, no. 5, pp. 1858–1862, 2017.

S. Salisu, O. O. Joel, and A. O. Murray, “Design, Construction, and Simulation of a Solar Fish Dryer,” Int. J. Trend Sci. Res. Dev., vol. Volume-3, no. Issue-2, pp. 239–244, 2019, doi: 10.31142/ijtsrd20299.

C. a Komolafe, C. R. Engr, I. O. Ogunleye, D. Ph, and a O. D. Adejumo, “Design and Fabrication of a Convective Fish Dryer .,” Pacific J. Sci. Technol., vol. 12, no. 1, pp. 89–97, 2011.

DOI

https://doi.org/10.21107/ijseit.v6i1.13141

Metrics

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Emon Rifa'i

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.