Effect of Dredging Rate, Sintering Time, Cooling Media on Corrosion Results of Carbon Steel Dredging

dani irawan


Metal reinforcement that has an impact on improving mechanical properties can occur in various ways, including by strain hardening mechanisms, solid solutions, second phase, prespitations, disperse, grain refinement and texture. In recent years, another method has been developed to obtain good mechanical properties without adding alloy elements, namely by the method of comprehensive plastic deformation (Severe Plastic Deformation). The purpose of this research is to conduct a study of rolling using medium carbon steel with a treatment temperature above recrystallization, rolling rate, sintering time, cooling media as an effort to develop and design new innovations about steel structures being rolled. The study of developing rolling techniques that can be applied in industry and can be applied as learning material / media in higher education requires structured research stages. The best impact value from this temper process is a temperature of 550 ° C for 1 hour where the impact value is 1.58 J / mm² with air conditioning media. In the rolling process above the recrystallization temperature 800 ° C deformation 20% the impact value is 1.7 J / mm² where the toughness indicates a ductile fracture while the deformation is 10% the impact value

Full Text:



R. M. Bisono and R. M. Yusron, “Optimization Multi Response on Electrical Discharge Machining Sinking Process Using Taguchi-Grey-Fuzzy Methods,” Int. J. Sci. Eng. Inf. Technol., vol. 4, no. 2, pp. 209–214, 2020, doi: 10.21107/ijseit.v4i2.6705.

J.-R. Zhao, F.-Y. Hung, and B.-J. Chen, “Effects of heat treatment on a novel continuous casting direct rolling 6056 aluminum alloy: cold rolling characteristics and tensile fracture properties,” J. Mater. Res. Technol., vol. 11, pp. 535–547, 2021, doi: https://doi.org/10.1016/j.jmrt.2021.01.037.

W. J. Cantwell and J. Morton, “The impact resistance of composite materials — a review,” Composites, vol. 22, no. 5, pp. 347–362, 1991, doi: https://doi.org/10.1016/0010-4361(91)90549-V.


T. Shiwei et al., “Oxidation resistance of TiAl alloy improved by hot-pack rolling and cyclic heat treatment,” Mater. Charact., vol. 178, p. 111196, 2021, doi: https://doi.org/10.1016/j.matchar.2021.111196.

C. Veera, B. A. Pradeep, C. Boopathi, R. K. Sanjeev, and V. Meganathan, “Comparison of geometrical accuracy and surface finish of cam profile generated by wire-EDM and CNC milling machine Comparison of geometrical accuracy and surface finish of cam profile generated by wire-EDM and CNC milling machine,” pp. 0–8, 2020, doi: 10.1088/1757-899X/764/1/012041.

J. Liu, H. Wu, S. Yang, X. Yu, and C. Ding, “Effect of hot rolling reduction and annealing treatment on grain boundary character distribution in austenitic low-density Fe-Mn-Al-C-Cr steel,” Mater. Lett., vol. 285, p. 128999, 2021, doi: https://doi.org/10.1016/j.matlet.2020.128999.

L. Liang, S. Chen, and P. Li, “The evaluation of vehicle interior impact noise inducing by speed bumps based on multi-features combination and support vector machine,” Appl. Acoust., vol. 163, p. 107212, 2020, doi: https://doi.org/10.1016/j.apacoust.2020.107212.

R. K. Jha and P. D. Swami, “Fault diagnosis and severity analysis of rolling bearings using vibration image texture enhancement and multiclass support vector machines,” Appl. Acoust., vol. 182, p. 108243, 2021, doi: https://doi.org/10.1016/j.apacoust.2021.108243.

L. Chai et al., “A strategy to introduce gradient equiaxed grains into Zr sheet by combining laser surface treatment, rolling and annealing,” Scr. Mater., vol. 196, p. 113761, 2021, doi: https://doi.org/10.1016/j.scriptamat.2021.113761.

T.-A. Pan, Y.-C. Tzeng, H.-Y. Bor, K.-H. Liu, and S.-L. Lee, “Effects of the coherency of Al3Zr on the microstructures and quench sensitivity of Al–Zn–Mg–Cu alloys,” Mater. Today Commun., vol. 28, p. 102611, 2021, doi: https://doi.org/10.1016/j.mtcomm.2021.102611.

I. P. Starodubtseva, D. V Kuznetsov, and A. N. Pavlenko, “Experiments and modeling on cryogenic quenching enhancement by the structured capillary-porous coatings of surface,” Int. J. Heat Mass Transf., vol. 176, p. 121388, 2021, doi: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121388.

T. Wang, Y. Hu, P. Fu, and H. Liu, “Quench detection method for superconducting magnets with a phase difference measurement system based on multiple-correlation,” Fusion Eng. Des., vol. 170, p. 112658, 2021, doi: https://doi.org/10.1016/j.fusengdes.2021.112658.

P. Hurley and J. P. Duarte, “Implementation of fiber optic temperature sensors in quenching heat transfer analysis,” Appl. Therm. Eng., vol. 195, p. 117257, 2021, doi: https://doi.org/10.1016/j.applthermaleng.2021.117257.

R. M. Yusron, R. M. Bisono, and M. Pramudia, “Effect Electrolyte Temperature and Electrode Distance to Electroplating Hard-Chrome on Medium-Carbon Steel,” in Journal of Physics: Conference Series, 2020, vol. 1569, no. 4, doi: 10.1088/1742-6596/1569/4/042007.

W. Xu, C. Cheng, X. Song, and P. Zhang, “Experimental investigation of cryogenic flow quenching of horizontal stainless steel tubes,” Cryogenics (Guildf)., vol. 117, p. 103327, 2021, doi: https://doi.org/10.1016/j.cryogenics.2021.103327.

Y. Liu et al., “The Effect of High Frequency Pulse on the Discharge Probability in Micro EDM,” IOP Conf. Ser. Mater. Sci. Eng., vol. 281, no. 1, pp. 0–7, 2017, doi: 10.1088/1757-899X/281/1/012031.

S. Abulais, “Current Research trends in Electric Discharge Machining(EDM):Review,” vol. 5, no. 6, pp. 100–118, 2014.

K.-C. Fan, J. Torng, W. Jywe, R.-C. Chou, and J.-K. Ye, “3-D measurement and evaluation of surface texture produced by scraping process,” Measurement, vol. 45, no. 3, pp. 384–392, 2012, doi: https://doi.org/10.1016/j.measurement.2011.11.006.

A. Azam et al., “Design, fabrication, modelling and analyses of a movable speed bump-based mechanical energy harvester (MEH) for application on road,” Energy, vol. 214, p. 118894, 2021, doi: https://doi.org/10.1016/j.energy.2020.118894.

M. D. Fenre and A. Klein-Paste, “Bicycle rolling resistance under winter conditions,” Cold Reg. Sci. Technol., vol. 187, p. 103282, 2021, doi: https://doi.org/10.1016/j.coldregions.2021.103282.

S. Sauer and M. Clatworthy, “Editorial Commentary: The Ratio of Tibial Slope and Meniscal Bone Angle is a Strong Predictor for Anterior Cruciate Ligament Injury: A Steep Hill and a Shallow Speed Bump are a Hazardous Combination,” Arthrosc. J. Arthrosc. Relat. Surg., vol. 37, no. 5, pp. 1610–1611, 2021, doi: https://doi.org/10.1016/j.arthro.2021.02.006.

G. Monrrabal, A. Bautista, S. Guzman, C. Gutierrez, and F. Velasco, “Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces,” J. Mater. Res. Technol., vol. 8, no. 1, pp. 1335–1346, 2019, doi: https://doi.org/10.1016/j.jmrt.2018.10.004.

K. Sritharan, V. Manikandan, and K. Srinivasan, “Influence of solute-solvent interactions at the crystal-solution interface on the growth and morphology of the nonlinear optical single crystal methyl-p-hydroxybenzoate (p-MHB),” J. Mol. Struct., vol. 1243, p. 130870, 2021, doi: https://doi.org/10.1016/j.molstruc.2021.130870.

D. Valdés, S. Martinková, J. Málek, and J. Barták, “Crystal growth in Ge-Sb-Se glass and its relation to viscosity and surface diffusion,” J. Non. Cryst. Solids, vol. 566, p. 120865, 2021, doi: https://doi.org/10.1016/j.jnoncrysol.2021.120865.

J.-C. Ren, D. Liu, and Y. Wan, “Modeling and application of Czochralski silicon single crystal growth process using hybrid model of data-driven and mechanism-based methodologies,” J. Process Control, vol. 104, pp. 74–85, 2021, doi: https://doi.org/10.1016/j.jprocont.2021.06.002.

J.-S. Zhou et al., “Crystal growth of clinopyroxene in mafic alkaline magmas,” Earth Planet. Sci. Lett., vol. 568, p. 117005, 2021, doi: https://doi.org/10.1016/j.epsl.2021.117005.

S. Martinková, D. Valdés, S. Slang, K. Pálka, and J. Barták, “Relationship between crystal growth and surface/volume mobilities in Se95Te5 bulk glasses and thin films,” Acta Mater., vol. 213, p. 116953, 2021, doi: https://doi.org/10.1016/j.actamat.2021.116953.

H. Yang and H. Xue, “Effect of cold working on crack growth rate of environmentally assisted cracking of 316L SS,” Structures, vol. 28, pp. 446–455, 2020, doi: https://doi.org/10.1016/j.istruc.2020.09.006.

B. Yang, M. Wu, X. Li, J. Zhang, and H. Wang, “Effects of cold working and corrosion on fatigue properties and fracture behaviors of precipitate strengthened Cu-Ni-Si alloy,” Int. J. Fatigue, vol. 116, pp. 118–127, 2018, doi: https://doi.org/10.1016/j.ijfatigue.2018.06.017.





  • There are currently no refbacks.

Copyright (c) 2021 International journal of science, engineering, and information technology

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.