REDESIGN OF SEWING OPERATOR SEAT USING REVERSE ENGINEERING METHOD

Hidayat Hidayat

Abstract

We often see that many of the chairs that tailor tend to have a long shape and the width of the seat is quite narrow. The problem of working attitude faced by the sewing machine while running from a non-ergonomic work chair is the attitude of forced labor such as: lifting the operator up, and lifting the shoulder. If the ergonomic problem is not corrected, it will certainly give an excessive burden, musculoskeletal complaints which will be followed by a decrease in the level of work productivity. Therefore, it is necessary to conduct research in an effort to overcome the problems that arise. For this purpose, research was conducted on the Development and Design of Sewing Operator Chairs Using the Reverse Engineering Method. The number of research samples taken were 26 operators. In this study, it was found that there were 5 parts of the operator's seat that were repaired, namely in the seat connection, seat support mat, backrest, seat mat, and frame. And for the Popliteal Length percentile data at the 50th percentile, Hip width using the 95th percentile, Popliteal height using the 50th percentile.

Keywords

Sewing Operators, Reverse Engineering (RE), Ergonomics

Full Text:

PDF

References

Daywin, F. J., Utama, D. W., Kosasih, W., & Wiliam, K. (2019). Perancangan Mesin 3d Printer Dengan Metode Reverse Engineering (Studi Kasus di Laboratorium Mekatronika dan Robotics Universitas Tarumanagara). Jurnal Ilmiah Teknik Industri, 7(2), 79–89. https://doi.org/10.24912/jitiuntar.v7i2.5929

Eka Pratama, I. P. A. (2020). Pengujian dan Analisa Reverse Engineering Pada Platform Android (Studi Kasus: Tebak_Gambar.apk). JTT (Jurnal Teknologi Terpadu), 8(2), 69–76. https://doi.org/10.32487/jtt.v8i2.834

Nofirza, & Syahputra, D. (2016). Perancangan alat pemotong nenas yang ergonomis untuk meningkatkan produktivitas. Jurnal Ilmiah Teknik Industri, 11(1), 41–50.

Sokhibi, A. (2017). Perancangan Kursi Ergonomis Untuk Memperbaiki Posisi Kerja pada Proses Packaging Jenang Kudus. Rekayasa Sistem Industri, 3(1), 61–72.

Surya, R. Z., Wardah, S., & Hasanah, H. (2013). Penggunaan Data Antropometri dalam Evaluasi Ergonomi Pada Tempat Duduk Penumpang Speed Boat Rute Tembilahan - Kuala Enok Kab . Indragiri Hilir Riau. Malikussaleh Industrial Engineering Journal, 2(1), 4–8.

Tjandra, S., Fang, K., & Suteja, T. (2012). Perancangan Ulang Mesin Stuffing Ribbon Pada Pt. Xyz Dengan Metode Reverse Engineering. Jurnal IPTEK - Media Komunikasi Teknologi, 16(1), 40–54.

Wijaya, M. A., Anna, B., Siboro, H., & Purbasari, A. (2016). Pekerja Galangan Kapal Dan Mahasiswa Pekerja Elektronika the Comparative Analysis of Anthropometry Between Student of Shape Vessel Shipyard Workers and Students of Workers Electronic. Profisiensi, 4(2), 108–117.

DOI

https://doi.org/10.21107/ijseit.v6i2.14293

Metrics

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Hidayat -

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.