Evaluasi Manajemen Perawatan dengan Metode  Reliability Centered Maintenance (RCM) II pada Mesin Cane Cutter 1 dan 2  di Stasiun Gilingan PG Meritjan - Kediri

Cahyo Purnomo Prasetyo

doi:10.21107/rekayasa.v10i2.3611

Evaluasi Manajemen Perawatan dengan Metode Reliability Centered Maintenance (RCM) II pada Mesin Cane Cutter 1 dan 2 di Stasiun Gilingan PG Meritjan - Kediri

Cahyo Purnomo Prasetyo

Abstract

Penelitian ini bertujuan untuk menentukan kebijakan perawatan optimal yang dapat mengurangi biaya perbaikan (repair cost) dan biaya konsekwensi operasional (operational consequence cost). Metode yang diterapkan pada penelitian ini adalah Reliability Centered Maintenance (RCM) II. Penelitian ini difokuskan pada mesin Cane Cutter 1 dan 2 dengan pertimbangan beberapa aspek yaitu : pengaruh kegagalan terhadap pencapaian target produksi, resiko keselamatan kerja dan biaya perawatan yang akan ditimbulkan. Dari hasil penelitian dapat diketahui bahwa komponen kritis pada mesin Cane Cutter 1 dan 2 adalah : Pisau dan Baut Pisau. Perawatan yang dilakukan untuk mengantisipasi dan mengatasi kegagalan yang terjadi pada komponen mesin tersebut adalah proactive task yang meliputi : scheduled restoration task dan scheduled discard task. Rata-rata penurunan biaya perawatan total yang didapatkan dengan mengurangkan ‘biaya total pada interval perawatan awal’ dan ‘biaya total pada interval perawatan optimal’ adalah 14,82 %.

Kata Kunci: cane cutter, downtime, pabrik gula.

ABSTRACT

This research aims to determine the optimal maintenance policy which could reduce repair cost and operational consequence cost. The methods which applied in this research is Reliability Centered Maintenance (RCM) II. This research focuses on Cane Cutter 1 and 2 machines by considering several aspects, such as and effect of any failure on production target achievement, work safety risk and maintenance cost which might be caused by the critical condition. The result showed that some critical components at the Cane Cutter 1 and 2 machines were : Blade and Blade Bolt. The maintenance which could be done to anticipate and deal with any failure occurring in the machine components was called proactive task comprising : scheduled restoration task and scheduled discard task. The average reduction in total maintenance costs which was obtained by subtracting ‘total costs at initial maintenance interval’ and ‘total costs at optimal maintenance interval’ amounted to 14,82 %.

Keywords: cane cutter, downtime, sugar factory

Keywords

cane cutter, downtime, pabrik gula.

Full Text:

PDF

References

Hoyland, Arnjlot, and Rausand, Marvin, 1994, System Reliability Theory Models and Stastitical Methods, John Wiley & Sons Inc., New York.

Iriani, Y., Rahmadi, E.S., (2011), Usulan Waktu Perawatan Berdasarkan Keandalan Suku Cadang Kritis Bus di Perum Damri Bandung, 6th National lndustrial Engineering Conference, Universitas Widyatama, Surabaya, hal 171–178.

Moubray, John, 1997, Reliability Centered Maintenance, Second edition, Industrial press inc., New York.

Nordstrom, Jakob, 2007, RCM-based maintenance plans for different operational conditions, Lulea University of Technology.

Pakpahan, Agus, dkk., 2002, Program Akselerasi Peningkatan Produktivitas Gula Nasional, Sekretariat Dewan Gula Nasional, Dirjen Bina Produksi Perkebunan, Departemen Pertanian, Jakarta.

Pranoto, J., Matondang, N., dan Siregar, Ikhsan, 2013, Implementasi Studi Preventive Maintenance Fasilitas Produksi Dengan Metode Reliability Centered Maintenance Pada PT. XYZ, .e-Jurnal Teknik Industri FT USU, Vol 1, No 3, hal 18–24.

Rinne, H., 2009, The Weibull Distribution A Handbook, Chapman & Hall/CRC.

Silva, Carlos Manuel I, 2008, Proactive Reliability Maintenance: a case study conserning maintenance service cost, Journal of Quality in Maintenance Engineering, Vol 14, No 4, pp 343–355.

Soesetyo, I., dan Bendatu, L.Y., 2014, Penjadwalan Predictive Maintenance dan Biaya Perawatan Mesin Pellet di PT Charoen Pokphand Indonesia-Sepanjang, Jurnal Titra, Vol 2, No 2, hal 147–154.